Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   - 7.4. A transmission
      + 7.4.1. Type 014 four-speed transmission
      + 7.4.2. A five-speed transmission of type 013 or 093
      - 7.4.3. A five-speed transmission of types 016 and 012
         7.4.3.1. Removal and transmission installation
         7.4.3.2. Transmission dismantling
         7.4.3.3. A primary shaft
         7.4.3.4. Dismantling and assemblage of a secondary shaft
         7.4.3.5. Transmission assemblage
      + 7.4.4. The mechanism of management of gear change КП of type 016
      + 7.4.5. An automatic transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment




eb52c3b6

7.4.3.2. Transmission dismantling
THE GENERAL DATA

Carter of type 016 transmission
1 – an external ring of the bearing;
2 – an adjusting ring;
3 – the bearing;
4 – картер transmissions;
5 – a bolt;
6 – a clamp stopper;
7 – a lining;
8 – a spring;
9 – the plug-clamp;
10 – a persistent plate;
11 – a lock ring;
12 – the bearing;
13 – a cover картера;
14 – a magnet;
15 – a stopper;
16 – a lining;
17 – the plug-clamp;
18 – a spring;
19 – a bolt;
20 – a washer;
21 – spring скоба;
22 – a fixing plate;
23 – an axis of a gear wheel of a backing;
24 – a spring;
25 – the reverse gear synchronizer;
26 – an intermediate gear wheel of a backing;
27 – the lever of inclusion of a backing;
28 – a backing clamp;
29 – a plug of inclusion of a backing;
30 – an inclusion rod;
31 – a pin

PERFORMANCE ORDER
1. To clear of a dirt and to wash up outside a transmission.
2. To turn out маслоналивную and маслосливную stoppers and to merge oil from a transmission if before it it has not been made.
3. To turn out the screw of fastening and to remove the lever from a rod of the switch of transfers.
4. To turn away three bolts 18 (fig. type 016 Transmission see) and to uncover 16 with a lining.
5. To take out from картера couplings the switch of 14 transfers in gathering.
6. To turn away bolts of 2 fastenings and to disconnect картер 1 transmissions from картера 7 couplings.
7. To beat out заглушку 45 of a cover of 41 transmissions by means of the suitable tool.
8. To fix a primary shaft 19 from a procollar for шлицы and to turn away a bolt 44 from an opposite end face of a primary shaft.
9. To clamp in a vice картер 52 transmissions.
10. To turn away bolts of fastening and to uncover 41 transmissions, having pressed thus an internal ring of the back bearing of a primary shaft.
11. To press from a primary shaft the second internal ring 39 back bearings.
12. To press a nave 46 with a gear wreath of 5th transfer.
13. To beat out a pin of 37 fastenings from a plug of 5th transfer.
14. To remove a lock ring 27 (fig. Primary shaft КП 016 see).
15. To remove a gear wheel 4 (fig. type 016 Transmission see) 5th transfers with the synchronizer and a plug of inclusion of 36 5th transfers.
16. To remove two numbers of the needle bearing 49.
17. To turn away restrictive bolts of 29 rods of plugs
18. To include one of transfers and to fix a primary shaft from a procollar. To turn away a bolt 35 from an end face of a secondary shaft.
19. To press a gear wheel of 33 5th transfers from a secondary shaft and to remove an adjusting washer of 32 gear wheels of 5th transfer.
20. To beat out a spring pin 24 of a lead 23 rods of switching of 1st and 2nd transfers, having substituted under a rod a support not to damage an aperture in картере.
21. To beat out a pin 27 of a plug of 28 switchings of 3rd and 4th transfers, having substituted under a rod a support not to damage an aperture in картере.
22. To take out from картера a rod of 21 plugs of switching of 3rd and 4th transfers.
23. To turn out a stopper 15 (fig. Carter of type 016 transmission see) and to take out from картера a clamp 17 with a spring 18.
24. To turn out a bolt 51 (fig. type 016 Transmission see) fastenings of the intermediate lever of 53 inclusions of a backing.
25. To put forward, as far as possible, primary 19 and secondary 26 shaft from картера transmissions and to take out a primary shaft 19 together with a plug of 28 switchings of 3rd and 4th transfers.
26. To take out a backing clamp, having taken aside the intermediate lever of 53 inclusions of a backing.
27. To take out a secondary shaft 26 with a rod of 22 plugs of 25 switchings of 1st and 2nd transfers.
28. To remove spring скобу 21 (fig. Carter of type 016 transmission) the synchronizer of a backing see and to turn on the bolt of 19 fastenings of a plate 22.
29. To take out from картера a plate 22 and an axis 23 with a spring 24, the synchronizer 25 and an intermediate gear wheel 26 backings.
30. To turn out a reducer of a drive of a speedometer.
31. To turn away a bolt 3 (fig. Carter of type 016 transmission see) fastenings of a flange of 12 semiaxes, having fixed a flange through apertures under bolts of fastening with the help прутка or a small beard.
32. To turn away bolts of 13 fastenings of a cover of 11 differentials.
33. To uncover 11 differentials with a sealing ring by means of two screw-drivers.
34. To take out differential 10 in gathering from картера couplings.