Audi 100

1982-1990 of release

Repair and car operation



Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   - 1.21. Servicing of cars of release since August, 1985
      1.21.1. Engine maintenance service
      1.21.2. Transmission maintenance service
      1.21.3. Running gear maintenance service
      1.21.4. Steering maintenance service
      1.21.5. Maintenance service of brake system
      1.21.6. Electric equipment maintenance service
      1.21.7. Body maintenance service
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment




eb52c3b6

1.21.1. Engine maintenance service
THE GENERAL DATA

Through each 30 000 km of run it is necessary:

1. To check up and if necessary to adjust a tension of a belt of a drive of auxiliary units (the generator, the pump of the hydraulic booster of a steering, etc.).

2. To check up tightness of system of greasing. At detection подтекания oils to tighten fastening of knots of system of greasing.

3. To check up tightness of the power supply system and a condition of hoses. At detection подтекания fuel to tighten nuts, the union and collars of fastening of hoses. Hoses on which there are cracks, anguishes or if rubber has lost elasticity to replace.

4. To check up and if necessary to adjust frequency of rotation of a cranked shaft idling and the maintenance oxide carbon (WITH) and hydrocarbons (СН) in the fulfilled gases.

5. To replace spark plugs. To clear of a dust and a dirt high-voltage wires and tips of candles.

6. To replace the fuel filter.

7. To replace filtering element of the air filter.

8. At diesel engines to check up and if necessary to adjust a tension of a belt of a drive of a cam-shaft.

9. To check up a compression in engine cylinders.

Through each 12 000 km of run at the diesel engine to replace a belt of a drive of a camshaft and a belt of a drive of the fuel pump of a high pressure.

Once a year it is necessary:

1. To check up tightness of system of cooling and a condition of hoses. At detection подтекания a cooling liquid to tighten collars of fastening of hoses. If on hoses cracks are found out, anguishes or rubber has lost elasticity, hoses to replace.

2. To check up level of a cooling liquid and if necessary to add to norm. To check up density of a cooling liquid and if necessary to add a concentrate.

3. To replace oil in картере the engine and the oil filter.

4. To check up tightness of system of release of the fulfilled gases.