Audi 100

1982-1990 of release

Repair and car operation




Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


Работа метрология стандартизация сертификация самара. eb52c3b6



1.12. Heating and ventilation
THE GENERAL DATA

The control panel the conditioner

1 – the management handle distributive заслонками;
2 – the handle of adjustment of temperature;
3 – the handle of the switch of the electric motor of the fan;
4 – the button of the switch of modes of air circulation;
5 – the button of the switch of the conditioner

In the car the system of the ventilation effectively operating at closed windows is applied. Its feature is possibility to direct streams of air with different temperature in various zones of salon. Simultaneous giving of cold air in the top part of salon and hot air – in the bottom part is possible also.

Salon ventilation

For salon ventilation to open заслонки воздуходувов on the panel of devices.

The handle of 1 switch to establish in position or.

Having blown in the misted over glasses

To establish the handle of 1 switch in position.

To establish the handle 3 switches in position II or III.

In cold time to include the handle 2 switches heating for faster clearing of glasses.

Mode of warming up of salon

To open all воздуходувы.

The handle 2 switches to turn against the stop clockwise for inclusion of the maximum heating.

The handle of 1 switch to establish in position.

The handle 3 switches to establish in position III.

After warming up of salon by the switch 2 to establish the demanded temperature.

The conditioner

The conditioner joins at air temperature above +5 ° S.Pri to conditioner work always one should be opened at least воздуходув, differently the conditioner can become covered by ice.

Mode of cooling of salon

To close all windows.

To open all воздуходувы.

To include the conditioner, having pressed the button 5 switches (thus in the switch button the bulb lights up).

For faster cooling of salon to press the button 4 switches (thus in the switch button the bulb lights up). In this case air fence in the conditioner will occur from salon.

The handle 2 switches to establish the demanded temperature. For faster cooling of air the handle 2 switches to turn against the stop counter-clockwise.

The handle 3 switches to establish in position I, II or III. For faster cooling of air the handle 3 switches to establish in position III.

The handle of 1 switch to establish in position.

The conditioner with automatic maintenance of the set temperature

The conditioner maintains constant temperature in limits from +18 to +29 ° S.Esli the temperature out of the given limits the conditioner works constantly accordingly on cooling or heating is set.

If at ignition inclusion the control lamp to the left of button OUTSIDE TEMP (fig. the Control panel the conditioner see) blinks during 1 mines, it specifies in malfunction of the conditioner.

At low temperature of air the conditioner fan joins only after engine warming up. At not heated-up engine the fan can be included only buttons and HI.

At an engine overheat there can be an automatic self-switching-off of the compressor.

At high humidity and an ambient temperature dripping under the car from the evaporator the condensate is not a malfunction sign.

At malfunctions in a contour of cooling of the conditioner works the accident protection device which disconnects the conditioner.