Audi 100

1982-1990 of release

Repair and car operation

Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

Фбс блоки фундаментные купить. Бетонные блоки фбс ткжби.рф. eb52c3b6

1.19. Replacement of operational liquids and lubricants

Engine oil is necessary for changing through 15 000 km of run at petrol engines and through 7500 km – at diesel. At the new car it is necessary to replace oil after the termination обкатки (through 1500 km). At oil replacement necessarily replace also the oil filter.

In картер the engine it is recommended to fill in oil of the same mark what was in the engine. If oil of other mark is used, preliminary it is necessary to wash out system of greasing of the engine oil of that mark with which will fill in in the engine. For this purpose it is necessary to merge old oil, to fill in new oil on 2–4 mm above a label min on the index (probeе) oil level. To start the engine and to allow to it to work idling about 10 minutes Then to merge oil, to replace filtering element of the oil filter and to fill in fresh oil.

Once a year check density of a cooling liquid and if necessary add concentrate G11V8A. If there is no possibility to add a concentrate, it is recommended to change cooling liquid of 1 times in 2 years. It is necessary to mean that the cooling liquid is poisonous, therefore it is impossible to suck in a liquid a mouth at transfusion. At work with a cooling liquid it is recommended to use goggles, not to smoke and not to accept food on a workplace. If the liquid has got on open sites of a skin, them wash out water with soap.

Oil in a transmission is necessary for changing through 90 000 km of run. Through 15 000 km it is necessary to check oil level in a transmission and if necessary to add to norm. Oil level in КП should reach an aperture of a jellied stopper. In a drive of coupling and a drive of brakes it is necessary to change a brake liquid of 1 time in 2 years. It is recommended to spend this operation in the spring, simultaneously with the next maintenance service. In drives of brakes and couplings are used brake liquid FMVSS 116 DOT 4. A brake liquid гигроскопична, therefore it store only in the closed container.