Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   - 7.4. A transmission
      + 7.4.1. Type 014 four-speed transmission
      - 7.4.2. A five-speed transmission of type 013 or 093
         7.4.2.1. Removal and transmission installation
         7.4.2.2. Transmission dismantling
         7.4.2.3. Dismantling and assemblage of a primary shaft
         7.4.2.4. Dismantling and assemblage of a secondary shaft
         7.4.2.5. Dismantling and differential assemblage
         7.4.2.6. Transmission assemblage
         7.4.2.7. Adjustment of the mechanism of management by a gear change
      + 7.4.3. A five-speed transmission of types 016 and 012
      + 7.4.4. The mechanism of management of gear change КП of type 016
      + 7.4.5. An automatic transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment


http://russkieovoschi.ru/ обработка и хранение свеклы. . http://tv-ip.org/ €рославль интернет телевидение все в одном домашний интернет. eb52c3b6



7.4.2.2. Transmission dismantling
THE GENERAL DATA

Type 013 transmission

1 – a bolt;
2 – a semiaxis flange;
3 – a bolt;
4 – a cover of a box of differential;
5 – differential;
6 – a stopper of a drain aperture;
7 – a stopper of a jellied aperture;
8 – картер couplings;
9 – the switch of light of a backing;
10 – a lining;
11 – a pin;
12 – картер transmissions;
13 – a bolt;
14 – the plug;
15 – a washer;
16 – an internal ring of the bearing;
17 – the needle bearing of 5th transfer;
18 – a gear wheel of 5th transfer with the synchronizer;
19 – a pin;
20 – a plug of inclusion of 5th transfer;
21 – a blocking ring of the synchronizer of 5th transfer;
22 – a nave with a gear wreath;
23 – a lining;
24 – a transmission cover;
25 – a washer;
26 – a bolt;
27 – заглушка;
28 – a bolt;
29 – a washer;
30 – the switch of transfers;
31 – a pin;
32 – a lead;
33 – a nut;
34 – a gear wheel of 5th transfer;
35 – a rod of a plug of switching of 3rd and 4th transfers;
36 – an axis of an intermediate gear wheel of a backing;
37 – a pin;
38 – an internal ring of the bearing;
39 – a secondary shaft;
40 – a gear wheel;
41 – a rod of a plug of switching of 1st and 2nd transfers;
42 – a plug of switching of 1st and 2nd transfers;
43 – a plug of switching of 3rd and 4th transfers;
44 – a pin;
45 – an intermediate gear wheel of a backing;
46 – a primary shaft

PERFORMANCE ORDER
1. To merge oil from картера transmissions if it it has not been made earlier.
2. To turn out the switch of light of a backing.
3. To beat out заглушку 27 of a cover of a transmission by means of the suitable tool.
4. To fix a primary shaft 46 from a procollar for шлицы and to turn away a bolt 26 from an opposite end face of a primary shaft.
5. To turn away bolts of 28 fastenings and to uncover 24 transmissions, having pressed thus the back bearing from a primary shaft.
6. To beat out a spring pin 31 of a lead 32 rods of switching of 1st and 2nd transfers, having substituted under a rod a support not to damage an aperture in картере.
7. To shift back a rod of 35 switchings of a plug of 3rd and 4th transfers, having included thereby 3rd transfer.
8. To turn to the left the switch of transfers 30, having deduced from a groove of a rod of 3rd and 4th transfers, and to take out it from картера transmissions.
9. To remove a lead 32 from a rod of 41 plugs of 1st and 2nd transfers.
10. To beat out a spring pin 19 of a plug of inclusion of 5th transfer, having substituted under a rod a support not to damage an aperture in картере.
11. To press from a primary shaft the second internal ring of the back bearing.
12. To press from a primary shaft a nave 22 with a gear wreath.
13. To remove two numbers of the needle bearing 17 with an internal ring 16 and a persistent washer 15.
14. To block a secondary shaft from a procollar for what to include one of transfers and to fix a primary shaft from a procollar.
15. To turn away a nut 33 from an end face of a secondary shaft.
16. To press a gear wheel of 34 5th transfers from a secondary shaft.
17. To establish all rods of plugs of a gear change in neutral position.
18. To turn away bolts of fastening and to disconnect картер 12 transmissions together with primary and secondary shaft from картера couplings.
19. To clamp картер transmissions for inflow in a vice with overlays from soft metal.
20. To beat out a spring pin 44 of a plug of switching of 3rd and 4th transfers, having substituted under a rod a support not to damage an aperture in картере.
21. To shift back a rod of a plug of switching of 3rd and 4th transfers and to remove a switching plug.
22. To deduce a secondary shaft 39 of картера transmissions, how much it is possible, and to take out a primary shaft 46 of картера.
23. To establish a rod of switching of 3rd and 4th transfers to neutral position.
24. Выпрессовать an axis 36 intermediate gear wheels of a backing, having removed thus a gear wheel 45.
25. To take out a secondary shaft 39 simultaneously with a rod 41 and a plug of 42 switchings of 1st and 2nd transfers from картера 12 transmissions.
26. To turn out a reducer of a drive of a speedometer.
27. To turn away a bolt of 1 fastening of a flange of 2 semiaxes, having fixed a flange through apertures under bolts of fastening with the help прутка or a small beard.
28. To turn away bolts of 3 fastenings of a cover of 4 differentials.
29. To uncover 4 differentials with a sealing ring by means of two screw-drivers.
30. To take out differential 5 in gathering from картера couplings.