Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   + 7.4. A transmission
   - 7.5. A drive of forward wheels
      7.5.1. Полуось
      7.5.2. The internal hinge of equal angular speeds (SHRUS)
      7.5.3. The external hinge of equal angular speeds (SHRUS)
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment




eb52c3b6

7.5.2. The internal hinge of equal angular speeds (SHRUS)
THE GENERAL DATA

Details of a drive of forward wheels

1, 10 – a lock ring;
2 – an internal SHRUS;
3 – чехлодержатель;
4 – a sealing lining;
5 – a collar;
6, 11 – грязезащитные covers;
7 – полуось;
8 – a collar;
9 – an external SHRUS;
12 – тарельчатая a washer

Removal

PERFORMANCE ORDER
1. To remove полуось from the car (subsection 7.5 see).
2. To remove a collar 5 and to shift грязезащитный a cover 6.
3. To remove a sealing lining 4 and a lock ring 1.
4. To bring down from the case of the hinge by means of copper выколотки чехлодержатель 3.
5. To press from a semiaxis an internal SHRUS, putting effort to a hinge holder.
6. To remove from a shaft чехлодержатель 3 and грязезащитный a cover 6.

Installation

PERFORMANCE ORDER
1. To remove old lubricant.
2. To put in the hinge 90 г консистентной type greasings «G6» or domestic greasing ШРУС-4.
3. To establish on полуось тарельчатую a washer 12 (if it is available on a complete set).
4. Напрессовать подсобранный the hinge on a shaft against the stop.
5. To establish a lock ring 1.
6. To establish чехлодержатель 3 on the external case of the hinge.
7. To put on on чехлодержатель 3 грязезащитный a cover 6.
8. To establish a new collar 5 and to press out its lock.
9. To establish a sealing lining 4.
10. To establish полуось on the car.