Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   - 7.3. A hydraulic drive
      7.3.1. The main cylinder of a drive of coupling
      7.3.2. The working cylinder of a drive of coupling
      7.3.3. The bearing of deenergizing of coupling (model of release after 1988)
      7.3.4. Prorolling of system of a drive of deenergizing of coupling
   + 7.4. A transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment




eb52c3b6

7.3.3. The bearing of deenergizing of coupling (model of release after 1988)
THE GENERAL DATA

The device of a plug of deenergizing of coupling on models since 1988

 
1 – картер couplings;
2 – a spherical finger;
3 – the holder;
4 – a washer;
5 – a sealing ring;
6 – an epiploon;
7 – the directing plug;
8 – a spring clip;
9 – a plug of deenergizing of coupling;
10 – the bearing of deenergizing of coupling

Replacement

PERFORMANCE ORDER
1. To remove a transmission.
2. To remove by means of a screw-driver a spring clip of fastening of the holder to a spherical finger.
3. To remove a plug of deenergizing of coupling with the bearing from the directing plug.
4. To remove the holder from a plug.
5. To take out the bearing from a plug.
6. To insert a finger of the holder into a plug.
7. To grease basic surfaces of a plug with graphite greasing and to establish a plug on directing plug. Thus the holder to establish on a spherical finger.
8. To establish a spring clip, having fixed the holder on a spherical finger.
9. To get the bearing of deenergizing of coupling in a plug at an angle 45 °. Then to establish it on the directing plug.