Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of position of a pedal of a brake
   10.3. The main cylinder of a brake
   10.4. The brake mechanism of a forward wheel of mark Teves
   10.5. The brake mechanism of a forward wheel of mark GIRLING
   10.6. A brake disk
   10.7. The case скобы and the piston
   10.8. The drum-type brake mechanism of a back wheel
   10.9. A brake drum
   10.10. The wheel brake cylinder
   10.11. The disk brake mechanism of a back wheel
   10.12. A pressure regulator
   + 10.13. A lay brake
   10.14. Antiblocking system of brakes (ABS)
   10.15. Prorolling of brake system
+ 11. A body
+ 12. An electric equipment




Шикарные индивидуалки Ростова-на-Дону eb52c3b6

10.9. A brake drum
THE GENERAL DATA

The brake drum is collected with a nave of a wheel and actually they are one detail. Removal and installation of a brake drum see in subsection 8.2.3.

Survey and дефектовка

PERFORMANCE ORDER
1. Carefully to clear a brake drum.
2. To measure by a calliper diameter of a working surface of a drum. As much as possible admissible diameter of a drum of 231 mm. If it is necessary to replace diameter of more admissible, a drum. At presence рисок the drum can be chiseled, but taking into account that its definitive diameter of a working surface was no more admissible.
3. As much as possible admissible radial palpation of a drum measured on a working surface, 0,1 mm, and is minimum admissible axial palpation of 0,2 mm.