Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   + 6.1. The power supply system of carburettor engines
   + 6.2. The power supply system of engines with fuel injection
   - 6.3. The power supply system of the diesel engine
      6.3.1. Check of giving of fuel
      6.3.2. Power supply system prorolling
      6.3.3. Adjustment of a cable of giving of fuel
      6.3.4. Adjustment connecting рейки
      6.3.5. Check and adjustment of frequency of rotation of idling
      6.3.6. Check and adjustment of the maximum frequency of rotation
      6.3.7. Replacement of atomizers
      6.3.8. Plums of a sediment from the fuel filter
      6.3.9. Replacement of the fuel filter
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.3.3. Adjustment of a cable of giving of fuel

THE GENERAL DATA

Drive of an accelerator of the diesel engine

1 – a pedal overlay;
2 – an accelerator pedal;
3 – the pedal bearing;
4 – a cable tip;
5 – a cable of giving of fuel;
6 – a cable cover;
7 – an arm of fastening of a cable;
8 – a cam;
9 – blooming скоба;
10 – a bolt;
11 – a washer;
12 – the intermediate lever;
13 – a nut;
14 – a nut of fastening of an arm;
15 – a platen arm;
16 – the platen;
17 – the drive lever рейки;
18 – рейка

The prevention
It is necessary to consider that a cable very fragile, therefore at work with it it is necessary to observe extra care and not to bend it. A cable which was exposed to excesses, it is necessary to replace.

PERFORMANCE ORDER

1. To press against the stop a pedal of an accelerator and to fix it in this position.

2. To take out lock скобу (it is noted by an arrow), to pull a cable so that lever TNVD concerned the terminator, and to insert lock скобу into the groove nearest to an arm on a cable tip.