Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
- 8. A running gear
   - 8.1. A forward suspension bracket
      8.1.1. A telescopic rack
      8.1.2. Shock-absorber replacement
      8.1.3. Removal and installation of the stabilizer of cross-section stability
      8.1.4. A nave of a forward wheel
   + 8.2. A back suspension bracket
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

8.1.2. Shock-absorber replacement

THE GENERAL DATA

The prevention
At replacement of the shock-absorber the car should stand on wheels.

PERFORMANCE ORDER

1. To remove the decorative cap closing access to a nut of the top fastening of the shock-absorber.

2. To turn away a nut of the top fastening of the shock-absorber, keeping a rod of the shock-absorber from проворачивания with the help шестигранника.

3. To mark position of washers on the top support of a rack, having led round their contour, for preservation of a corner of disorder of forward wheels.

4. To turn away a nut of fastening and to remove the top support of a rack.

5. Steering wheel turn to centre a rod of the shock-absorber concerning the basis of the top support.

6. To remove from a rod of the shock-absorber a washer and the buffer of a course of compression.

7. Through spring coils to compress a protective cover and to remove a protective cap.

8. To turn on by means of the special adaptation a nut of the bottom fastening of the shock-absorber (at servicing deports the adaptation 2069 is used).

9. To take out the shock-absorber upwards.

Installation

PERFORMANCE ORDER

1. To establish the shock-absorber upside-down.

2. Thus to fill the top edge of a protective cover in a spring lining, having pressed to a protective ring.

3. A nut of the top fastening of the shock-absorber to replace on new and to tighten its moment 60 Н·м (6,0 кгс·м), keeping thus a rod of the shock-absorber from проворачивания with the help шестигранника.